|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HIGH FREQUENCY MAGNETICS Surface Mount Wideband Signal Splitter * Surface-mount, equal-ratio 3-port hybrid transformer designed for both analog and digital applications requiring signal splitting or combining Extremely wide frequency response Very fast rise time Operating temperature range -40 C to +85 C Meets IEC 695, 2-2 flammability requirements * * TM00152 PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias Tape and reel packaging: 24 mm wide by 16 mm pitch; 13 inch OD, 4 inch ID; 350 transformers per reel, max Meets ANSI/EIA 481-2 Carrier Tape Standards for JEDEC SO package * * * * * ELECTRICAL SPECIFICATIONS at 25C Impedance Ratio Part Number (1-6) : (3-6) + (4-6) S553-6500-93 75W : 75W + 75W Nominal Signal Split dB (1-6) to (3-6) (1-6) to (4-6) 3.0 3dB Bandwidth typ (1-6) to (3-6) (1-6) to (4-6) 20 kHz - 800 MHz Pulse Rise Time ns typ 0.5 Return Loss (RL) typ Port A B C RL>20 db 100 kHz - 500 MHz 200 kHz - 500 MHz 200 kHz - 500 MHz RL>30 db 400 kHz - 200 MHz 2 MHz - 300 MHz 2 MHz - 300 MHz B to C Port Transhybrid Loss (THL) typ THL>20 db THL>30 db 100 kHz - 800 MHz 300 kHz - 500 MHz Port A = ASIG to GND Port B = BSIG to GND Port C = CSIG to GND SCHEMATIC S553-6500-93 ASIG 1 3 BSIG 5 2 GND 6 4 CSIG (c)2000 Bel Fuse Inc. Specifications subject to change without notice. 09.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com T1-121 HIGH FREQUENCY MAGNETICS TM00152 Surface Mount Wideband Signal Splitter MECHANICAL S553-6500-93 0.060 (1.52) PHOSPHOR BRONZE, SOLDER COATED 6 0.280 (7.11) MAX 1 5 4 0.189 (4.80) 0.404 (10.26) MAX 2 3 0.076 (1.93) 0.268 (6.81) 0.670 (17.02) MAX 0.268 (6.81) 0.340 (8.64) MAX 0.004 (0.10) 6 SURFACES 0.268 (6.81) 0.090 (2.29) 6 5 4 0.434 0.139 (11.02) (3.53) 1 2 3 SUGGESTED PCB PAD LAYOUT Unless otherwise specified, dimensions are nominal and in inches (millimeters). (c)2000 Bel Fuse Inc. Specifications subject to change without notice. 09.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com T1-122 HIGH FREQUENCY MAGNETICS Surface Mount Wideband Signal Splitter TM00152 APPLICATIONS NOTES The S553-6500-93 hybrid transformer operates with 75 terminations over an extremely wide frequency spectrum (3 dB response: 20 kHz to 800 MHz). It can also be used as a pulse transformer with very fast pulses (typical rise time: 0.5 ns). The transformer operates as either a signal splitter or a signal combiner. As a signal splitter, the transformer provides two identical output signals (which are in phase with each other) from a single input. Each of the two output signals is 3 dB down from the input signal (half the power of the input signal). There is a high degree of separation or transhybrid loss between the two output signals. As a signal combiner, the transformer provides a single output signal from two identical input signals (which are in phase with each other). The output signal has twice the power of either input signal. PIN DIAGRAM 2689J2 ASIG 1 6 GND COM1 2 5 COM2 BSIG 3 4 CSIG SIGNAL SPLITTER INPUT 75 LINE ASIG OUTPUT BSIG COM1 COM2 C1 GND 75 LINE R1 OUTPUT 75 LINE 2689J2 PIN DESCRIPTIONS AND TERMINATIONS Pin 1 2 3 4 5 6 Symbol Name and Function ASIG COM1 BSIG CSIG COM2 GND R1 C1 A signal. Input for splitter configuration. Output for combiner application. Common point of transformer 1. Must be connected externally to COM2. B signal. Output for splitter configuration. Input for combiner application. C signal. Output for splitter configuration. Input for combiner application. Common point of transformer 2. Must be connected externally to COM1. Ground. Connect to circuit ground. 162 external resistor. 7 pF external capacitor. 75 LINE CSIG SIGNAL COMBINER 2689J2 ASIG INPUT 75 LINE R1 INPUT CSIG BSIG COM1 COM2 C1 GND OUTPUT 75 LINE (c)2000 Bel Fuse Inc. Specifications subject to change without notice. 09.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com T1-123 HIGH FREQUENCY MAGNETICS TM00152 Surface Mount Wideband Signal Splitter This page intentionally left blank. (c)2000 Bel Fuse Inc. Specifications subject to change without notice. 09.00 CORPORATE Bel Fuse Inc. 198 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com T1-124 |
Price & Availability of S553-6500-93 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |